Pyrolysis Oil Distillation Machine

Pyrolysis Oil Distillation Machine

Pyrolysis Oil Production Line
Capacity: 500L to 50 tons per day Raw materials: waste tyre oil, waste plastic oil, waste engine oil, waste rubber oil etc Product: diesel or base oil or gasoline. Technology: Normal pressure or negative pressure distillation The waste oil to diesel fuel refinery equipment/machine is applied to recycle the waste liquid oil (such as crude oil, used engine oil, waste tyre or plastic oil from pyrolysis plant) into diesel, gasoline or base oil(from used engine oil). It mainly includes oil distillation kettle, rectifying tower, oil-gas cyclone sedimentation tank, condensation system, oil storage tanks, vacuum system, heating system, emission controlling system, feedstock pretreatment system. Tyre oil making diesel plant process flow chart Main parts introduction of the system 1. Heating system It includes the fuel tank, heater, heating furnace. The advantages are…
Read More
Continuous Waste Tire to Oil Pyrolysis Plant

Continuous Waste Tire to Oil Pyrolysis Plant

Pyrolysis Oil Production Line
Introduction of continuous waste tire to oil pyrolysis plant Continuous waste tire to oil pyrolysis plant The continuous waste tire to oil pyrolysis plant industry laid the status of  Lingfine waste tire to oil plant, continuous waste tire to oil pyrolysis plant  highly praised by customers at home and abroad, the continuous waste tire to oil pyrolysis plant solves the problem of waste recycling ,such as scrap tires, waste plastics, waste rubber ,thecontinuous waste tire to oil pyrolysis plant can convert the waste recycling into fuel, continuous waste tire to oil pyrolysis plant  already  achieve and feeding in every second and minute ,automatic ejecting wastes residue,fuel product day and night ,safe operation ,save manpower,roduction efficiency,improve efficiency,durable , continuous waste tire to oil pyrolysis plant  can live 3-5 years than oil refining plant.Continuous waste…
Read More
Oil Seed Cleaning Section and Equipment

Oil Seed Cleaning Section and Equipment

Pretreatment & Press Line
In vegetable oil seeds, some impurities are inevitably entrained. In general, the impurities in oil are 1% - 6%, and the highest is 10%. Most of the impurities mixed with oil will adsorb a certain amount of oil in the process of oil production, but exist in the cake, resulting in oil loss and lower oil yield. Mixed with organic impurities in oil will cause oil or oil to deepen the influence of oil sediment quality at the same time, meal quality is poor, affecting the development and utilization of resources of the cake. Using a variety of cleaning equipment will reduce oil loss to remove these impurities, improving oil yield; improving the quality of oil and meal; improving the processing capability of the equipment; ensuring the safety of equipment,…
Read More
Puffing Process Technology and Equipment

Puffing Process Technology and Equipment

Pretreatment & Press Line
Working Principle Puffing pretreatment process is that, in a wet and hot state, quickly make material flake pass through the outlet of extrusion puffing machine, and make the material temperature increases rapidly from 88-110℃, moisture of soybean flake is 10-12%, of cottonseed kernel is 7.5-12%, rice bran puffing grains temperature can reach 130℃ in the outlet. Through the puffing pretreatment process, the effect of lipase on the quality of oil is deactivated at wet and humid temperatures, the inactivation rate of enzyme has been reached above 95%. Through puffing pretreatment, the extracted flake volume-weight is increased from 400kg/m³to 600kg/m³. It is beneficial to wetting and eliminating the solvent because the evaporation of the puffing particles moisture forms micropores and increases the specific surface area of the solvent contact. After puffing…
Read More
Oil Pressing Technology & Oil Press Machine

Oil Pressing Technology & Oil Press Machine

Pretreatment & Press Line
Classification Oil pressing can be divided into hot pressing and cold pressing according to whether the material is subjected to heat treatment before pressing. The edible vegetable oil in our daily life is mostly hot pressed oil, that it, before oil pressing, first cleaning, crushed and then heated by high temperature to make oil inside have a series of changes, destroy oil cells and promote the protein denaturation, reducing the viscosity of oil, to be suitable for oil pressing from and improving oil yield. Hot Pressing Hot pressing is to extract oil after seeds roasting, the smell is fragrant, the color is deep, and the yield is higher. Advantages of hot pressing process Residues left in the product are small and easy to store. And cold pressed seeds without frying,…
Read More
Flaxseed Oil Pretreatment Plant

Flaxseed Oil Pretreatment Plant

Pretreatment & Press Line
Linseed oil, also known as flaxseed oil or flax oil, is a colourless to yellowish oil obtained from the dried, ripened seeds of the flax plant. The oil is obtained by pressing, sometimes followed by solvent extraction. Linseed oil is a drying oil, meaning it can polymerize into a solid form. Linseed oil is an edible oil in demand as a nutritional supplement, as a source of α-Linolenic acid, (an omega-3 fatty acid). In parts of Europe, it is traditionally eaten with potatoes and quark. Process Flow of Linseed Oil Pretreatment Plant Main Equipment of Linseed Oil Pretreatment Plant Vibratingscreen, destoner to remove the impurities, flake mill, oil pressing machine Capacity 10-200tpd flaxseed  pretreatment  10-200tpd  flaxseed solvent extraction  5-100TPD flaxseed  refinery and the dewaxing 
Read More
Palm Kernel Oil Pretretment Plant

Palm Kernel Oil Pretretment Plant

Pretreatment & Press Line
Palm kernel oil, palm oil, and coconut oil are three of the few highly saturated vegetable fats; these oils give the name to the 16-carbon saturated fatty acid palmitic acid that they contain. Palm kernel oil, which is semi-solid at room temperature, is more saturated than palm oil and comparable to coconut oil. It is commonly used in commercial cooking because of its relatively low cost, and because it remains stable at high cooking temperatures and can be stored longer than other vegetable oils. Process Flow of Palm Kernel Oil Pretreatment Plant Introduction of Palm Kernel Oil Processing Plant The traditional palm kernel oil extraction method is to fry palm kernels in old oil or simply heat the dried nuts. The fried kernels are then pounded or ground to a…
Read More
Palm Oil Press Plant

Palm Oil Press Plant

Pretreatment & Press Line
  The differences are in color (raw palm kernel oil lacks carotenoids and is not red). However, crude red palm oil that has been refined, bleached and deodorized, a common commodity called RBD palm oil, does not contain carotenoids. Palm oil is a common cooking ingredient in the tropical belt of Africa, Southeast Asia and parts of Brazil. Its use in the commercial food industry in other parts of the world is widespread because of its lower cost. The palm oil is the world's second largest edible vegetable oil, only ranking after soybean oil. At present, Malaysia and Indonesia is two largest palm oil producing countries in the world. Besides, there are many palm oil processing plants in Africa, such as Nigeria, Ethiopia, Congo, Ivory Coast etc. Our company is…
Read More
Moringa Oil Pretreatment & Pre-pressing Machine (Ben Oil, Moringa Seed Oil, )

Moringa Oil Pretreatment & Pre-pressing Machine (Ben Oil, Moringa Seed Oil, )

Pretreatment & Press Line
Moringa oil has been mentioned as a very useful oil in the medicinal books of Greece and Rome. Even today, this oil is used for a number of industrial applications. It is great for topical use on the skin and the hair. It is also a nice cooking oil with a soft, appealing taste. Seeds offer a relatively high yield of 22-38% oil. The oil can be extracted either by cold pressed method, or by solvent extraction . In olden times, it was extracted using hand pressing. There are many varieties of Moringa oil, depending on the variety of Moringa tree from which the oil is extracted. Oil taken from different locations has slight differences in nutrition and properties, like India, Sri Lanka, Kenya, Malawi and other parts of Africa.…
Read More
Shea Butter Pretreatment & Pre-pressing Plant

Shea Butter Pretreatment & Pre-pressing Plant

Pretreatment & Press Line
Process Flow of Shea Butter Oil Pretreatment & Pre-pressing Plant First process the dry shea nuts to get the kernel by shelling and separating. Shea Butteris derived from the Shea Nut Tree which grows in the western region of Africa. The fruits of these trees contain a nut. In the traditional method of extraction, the shea nuts are dried and ground. The powder is then boiled in water to release an unctuous substance which rises to the top and solidifies to create Shea Butter. This butter has been used for centuries in Africa to moisturize and protect the skin from sun, wind, heat and salt water.
Read More
Tea Seed Oil Pretreatment & Pre-pressing Plant (camellia oil)

Tea Seed Oil Pretreatment & Pre-pressing Plant (camellia oil)

Pretreatment & Press Line
There are mainly two kinds of production technology to produce tea seed oil, cold pressing method and extraction making tea seed oil. Making tea seed oil by cold pressing method is under the condition of 60℃, nutrient content is kept integrally, but the oil yield is low, so its price is high. Tea seed oil plant is used to process tea seed into tea seed oil, the process is simple, use cleaning machine to remove impurities and dust, use husking machine to remove husk and separate husk from kernel of tea seed. Adopt cold pressing technology to press oil and filtrate it to get crude tea seed oil. The refining process is also very simple, water washing for degumming, bleaching to make it clear, deacidification to remove FFA and get…
Read More
Canola Oil Pretreatment Pre-pressing Machine

Canola Oil Pretreatment Pre-pressing Machine

Pretreatment & Press Line
We have been specialized in canola oil extraction plant. We can offer whole line of canola oil plant with turnkey service, capacity from 5 to 6000TPD. For special capacity, our engineers can help you to design and install canola oil plant according to your real conditions. Introduction of Complete Set of Canola Oil Pretreatment &Prepressing Machine Canola oil plant starts with rapeseed, with oil content 40%, more or less. Same with other common oilseeds, there are four main sections of canola oil plant, including pretreatment &prepressing section, solvent extraction section, refinery section anddewaxing, winterization section. Pretreatment and prepressing section is the basic parts for a rapeseed oil mill plant.This section includes:cleaning,crushing,softening,flaking,roaster etc process to adjust the peanut seed into the best condition for oilpressing,easy to press oil out and easy for next production section. Process Flow of…
Read More